Master Guides

Doug Ryan Review: OutdoorMaster Shark II Electric Pump

Doug Ryan Review: OutdoorMaster Shark II Electric Pump
Outdoor Master Shark II electric pump review

Repost from Adventure Gear Insider

The Outdoor Master Shark Electric Pump is the best SUP pump out there today. It is reliable. It can pump up a bunch of boards in a row. It does everything you want an electric paddle board pump to do. It is an absolute must have for any inflatable paddleboard or kayak owner. Keep reading to learn all the details of the OutdoorMaster 20PSI High Pressure SUP Air Pump.

Features of the Outdoor Master Shark Electric Pump

Let’s take a look at what makes the Outdoor Master Shark 2 so great. Outdoor Master provided us with the pump for this review. As with all our reviews we will give you all the good and bad of it.

Price

The Outdoor Master Shark II Pump retails for $99-166 on the Outdoor Master website. You can get it for 10% off with our discount code OMBLOG20. 

Max Pressure

The Shark can inflate paddleboards up to 20 PSI. This is enough for almost every paddleboard made. Most inflatable SUPs are designed for 12.5 to 15 PSI pressure.

Inflating Multiple Boards with Cooling System

The Shark ii pump is one of the few pumps that claims it can inflatable several paddleboards in a row. Most pumps out there now can pump 1 or maybe 2 boards before overheating. The Shark can pump up 3 to 4 boards. It does this by having an active cooling system that keeps the motors cool. The cooling fan continues to run after pumping has stopped to ensure the motors can cool. The pump also has a sand filter inside to keep it from getting clogged and overheating. It has a 12a fuse to prevent damage if it does manage to get clogged.

In the event it does overheat, it has a high temperature cutoff that will shut down the motors until they cool off. This means increased safety because you won’t burn out your pump or start a fire from overheating.

Digital display

The pump has a very easy to use interface with a digital pressure gauge. It’s easy to read in any light condition from bright sunlight to after dark. It can display both PSI and Bar. It can inflate up to 20 PSI in 0.5 PSI increments. To use you set the Pressure with the +/- buttons and hit the power and let it go. It automatically shuts off when it reaches the desired pressure.

shark pump pressure display
Easy to use controls and display

Fast inflation and deflation

It pumps fast thanks to a 2 stage pump. It has both a high volume pump and a high pressure pump. It automatically switches around 1 psi too high pressure inflation. This is about the air pressure I find I have to switch from 2 stage to 1 stage with a hand pump. I timed pumping my Chasing Blue Infinite 10’6″ board and it took 7 minutes and 31 seconds. It takes me just under 6 minutes to do it by hand if I am really going at it.

The pump is quiet during the low pressure stage. It gets louder during the high pressure stage which is most of the inflation time. Every paddleboard pump we have tried has been equally loud once they go into the high pressure mode.

The pump has a deflation function as well as inflation. Move the hose to the deflate nozzle and it will suck the air out of your board.

12 volt power cord

This pump runs off of a 12 volt power source such as the 12 volt outlet in your car. The cord is 10 feet long so you can easily reach the board from your car.

Inflation valves

It comes with a variety of valves that cover almost every paddleboard made. This includes an H3/Halkey-Roberts, Pinch, Boston, 805, and C7 valve. It also includes a few different thickness gaskets to make all these adapters work. A new feature of the Shark 2 is that the adapters are connected to the end of the inflation hose instead of in a separate bag. This way you don’t need to keep track of a little bag of parts with the pump.

Dolphin air valves
Included inflation valves and gaskets

You can use this electric air pump on more than just inflatable paddleboards and kayaks. It can be used for almost any inflatable boat, inflatable watercraft, towing tube, inflatable dinghy, or other high pressure inflatables.

How well does it work?

This is one of the best paddleboard accessories you can get. I am extremely pleased with it so far. It works and works well. Let’s talk about some of the best points of this paddle board pump.

Inflation times

Inflation times almost as fast as hand pumping. I have tried out the Shark 2 on a variety of boards now.

  • 10’6″ x 32″ All Around Board – 14 psi – 8 minutes 40 seconds
  • 12’6″ x 30″ Touring Board – 15 psi – 9 minutes 35 seconds
  • 12’6″ x 30″ Touring Board – 20 psi – 13 minutes 1 second

I can beat most of these times with the included hand pumps by 1 to 2 minutes. It takes a lot of work, minimum breaks to rest, and you are exhausted by the time you are finished doing it.

Below is a table of the time it takes all the pumps we tested to inflate a 10’6″ All Around Board and a 12’6″ Touring Board

Electric Pump 10’6 x 32.5″ x 6″ All Around Board 12’6″ x 30″ x 6″ Touring Board 12’6″ x 30″ x 6″ Touring Board
14 psi 15 psi 20 psi
Outdoor Master Shark 2 8 min 40 sec 9 min 35 sec 13 min 1 sec
Outdoor Master Whale 9 min 22 sec 9 min 58 sec
Outdoor Master Cachalot 7 min 51 sec 9 min 23 sec 13 min 49 sec
Outdoor Master Dolphin 2 9 min 27 sec 11 min 23 sec 14 min 36 sec
iRocker Electric Pump 7 min 5 sec 8 min 32 sec 11 min 50 sec
NIXY Ventus 8 min 28 sec 11 min 15 sec 14 min 34 sec
Serenelife SLPUMP50 7 min 37 sec 9 min 7 sec
Serenlife SLPUMP30 8 min 12 sec 9 min 27 sec 14 min 20 sec
Serenlife SLPUMP10 11 min 32 sec 13 min 49 sec
Valwix Electric Pump 7 min 10 sec 8 min 48 sec 12 min 16 sec
Airbank Puffer Pro 7 min 27 sec 9 min 8 sec 12 min 48 sec
Airbank Whale Shark Pro 7 min 49 sec 9 min 41 sec 13 min 13 sec

What we liked about the Shark 2

The pump is very straight forward and easy to use. It comes with instructions but most people could figure it out without them. After plugging it in, you press the +/- buttons to set the target pressure. After this, you push the power button to start it. Then it pumps until the desired psi is achieved and it stops. Nothing to it. It handles switching from low to high pressure on its own.

The cooling fan works very well. To test out the pump, I inflated my board to its max pressure (13psi), deflated it, and inflated it again. I did this 4 times in a row to see how hot the pump would get. The result is that it didn’t get warm. This has proven to be a very consistent cooling system. The inflate hose was a little warm but that is it. It didn’t feel warm anywhere on the pump housing. It was about an 85F day while I did this.

I have inflated my board twice several times in a row while setting things up, figuring out how to use the pump, and showing friends how the pump works. It’s never gotten warm yet.

I timed the inflation of my board. It went from zero pressure to 13 psi in 7 minutes and 31 seconds. It takes longer than I can do it by hand but only by a minute. I’m sure it will save time on a hot day when I need to take more breaks while pumping. The pump doesn’t need to rest when the pumping gets difficult. I’d rather use my energy enjoying my paddleboard, not pumping it up.

Deflating with the pump worked very well. You have to unscrew the hose and screw it into the deflate port. Turn it on and let it suck the air out. This made deflating quick and easy compared to sucking out air with a hand pump or rolling the board to squeeze the air out. You will notice a change of tone when the pressure hits zero and you start sucking a vacuum into your SUP. Turn off the pump and disconnect the hose at that point.

OutdoorMaster Discount Code

Use the Coupon Code OMBLOG20 for 10% off at Outdoor Master Website

The Verdict

I think this pump is a must have for anyone who has an inflatable paddle board or inflatable kayak. It turns the pumping process from a chore with a manual pump to a nice relaxing few minutes. This pump is reliable, easy to use, pumps strong, and can pump up several boards. I would buy this pump again and recommend it to all my friends.