If you are undecided about getting a inflatable paddle board electric pump, this article will make you sure about this decision. In it, I will share with you my top reasons why I recommend it.

Before going into details, make sure to join our SUP Facebook Group , where our friendly staff and SUP specialist will give you the best support and help to get started!

Now that you became one of us, let’s start with the first benefit.

YOU SAVE TIME

While the time it takes to inflate your board with an electric SUP pump varies depending on the type, there is no doubt that they are faster than manual pumps . To fully inflate your board using a manual pumps, you'll need a lot of time, more so if you are a small paddler.

On the other hand, electric paddle board pumps are efficient, quick, and can inflate your board in about 10 minutes or even less depending on the model. This could save you a significant amount of time. Bottom line, if you're out with a group and want to have all of your boards inflated in a reasonable amount of time, an electric SUP pump is a good option.

YOU SAVE ENERGY FOR PADDLING

An electric pump will improve your paddle boarding experience in ways manual pumps can’t. It's an electric pump, which means it's far faster and more efficient and is not manually operated. A manual stand-up paddle board pump can be one awesome way to warm up for stand-up paddle boarding, but it requires more effort at times. It can even be difficult to properly inflate your paddle board using it, especially if you are a small paddler.

An electric pump, on the other hand, can inflate your boards without requiring any work on your part. You won't have to put in any effort to inflate your SUP apart from connecting it to the board. This will save you a lot of energy, allowing you to paddle faster and longer.

YOU CAN INFLATE MULTIPLE BOARDS CONTINUOUSLY

Although some electric pumps require a break after inflating one board or two in typical weather, the fact that they can inflate multiple boards continuously makes it a worthy pick. After all, with a manual paddleboard pump, you are incapable of achieving this without major energy loss.

That's not all; most electric SUP pumps come with multiple universal paddle board electric pump adapters. As a result, you are less worried about compatibility issues.

Keep the following tips in mind to get the most out of your electric paddle board pump while minimizing harm. Check the temperature, especially around the hose and vents, if your electric pump is hot. If one of the sections looks to be a little hotter to touch than the rest, your electric pump should take a break. In any way, so that your electric SUP pump does not suffer from temporary damage or even total pump failure, you may need to stop to allow it to cool down after inflating a single SUP if it is particularly hot or left in the sun.

You can also benefit from the fact that many latest SUP electric pumps , on the other hand, do not overheat. They are designed with a built-in cooling system that keeps the pump cool, extending its life by preventing them from overheating in many circumstances.

YOU PREVENT YOUR BOARD FROM OVERINFLATING

Overinflating your board can, in fact, damage your board. Another reason to choose an electric pump rather than a manual pump could be because of this. It's nearly impossible to overinflate your paddle board with an electric paddleboard pump.

Many electric pumps come with a PSI (unit of air pressure) gauge to assist you to keep track of the actual air pressure inside your board during the process of inflating it. It is therefore impossible to overinflate it. You can quickly set the desired PSI and be able to monitor your board's progress while it's being pumped to avoid over-inflating it. The nice aspect is that once it hits the PSI you specify, it will automatically switch off.

So, in many ways, you won't be able to damage your board if you stick to the recommended PSI limit for the board you're inflating. This can be accomplished with a manual paddle board pump but it requires some effort and attention from you.

If this benefit resonates with you, I will recommend you the Outdoor Master Dolphin SUP pump (Shop on Amazon). It has a built-in cooling system, can inflate up to 20 PSI, can shuts-off automatically, and the best thing, comes at an affordable price.

ABILITY TO EASILY INFLATE UP TO HIGH AIR PRESSURES

The ability to inflate to high pressures is one of the best features of an electric paddle board pump. The majority of them are capped at 15 PSI, although some can go as high as 20. This will allow you to inflate your SUP to a high level of pressure. After all, most SUPs operate at a pressure of 12-15 PSI.

As earlier stated, the nicest thing is that they are pre-installed with pressure gauges. As a result, this will inform you how much air pressure is on your board. It is recommended, however, that you do not exceed your board's recommended PSI limit.

While the more pressure you apply, the more solid your SUP board becomes, overinflating your inflatable SUP might result in irreparable damage. So, seek up the manufacturer's recommended limit and go to the upper maximum that it suggests and stick to it. Don’t be tempted to go higher than what is recommended.

Our Outdoor Master Shark II, other than its ability to deflate and inflate multiple SUP boards continuously, can inflate up to 20 PSI.

GETTING ALL THE AIR OUT OF YOUR BOARD TO FIT INSIDE ITS BAG

Yes, you can deflate your board using your hands. But did you know you can perform the same thing faster and more effectively with electric pumps that have this feature? When deflating your SUP, it is far better to use your electric pump because it will be able to remove more air from your board than you can by hand.

An electric paddle board pump can totally empty your paddle board from the air, making it much easier to fold it up and fit inside the bag. You will also be able to extend the life of your SUP as a result of this. After all, improper deflation of your SUP before storing your board might result in harm to its shape, and this could reduce your board’s overall performance.

FINAL THOUGHTS ON SUP ELECTRIC PUMP

FAQ

- HOW LONG DOES IT TAKE TO INFLATE A PADDLE BOARD?

The answer to this question depends on a few factors, such as the size and type of paddle board, the amount of air pressure required, and the method used to inflate the board. Most paddle boards can be inflated in around 5-10 minutes using an electric pump, although some may take longer if they are particularly

large or require higher air pressure. If you are using a manual pump, it may take a bit longer to reach the desired air pressure.

- WHAT IS AN ELECTRIC PUMP ADAPTER FOR A PADDLE BOARD?

An electric pump adapter for a paddle board is a device that helps to inflate the board using an electric pump. It is important to have this adapter in order to ensure that the paddle board is inflated correctly and to avoid any damage to the board.

The adapter fits onto the electric pump and has a nozzle that attaches to the valve on the paddle board.

- WHAT IS THE BEST SUP RECHARGEABLE AIR PUMP?

If you are looking for an air pump that is both powerful and rechargeable, then the best option on the market is the Outdoor Master WHALE.

This pump is capable of inflating paddle boards quickly and easily. It is also capable of keeping track of your progress.

FINAL THOUGHTS

There is no way a manual paddleboard pump can compete with an electric paddleboard pump when it comes to performance. Regardless of how much extra money you'll have to pay for it, the benefits outweigh the cost. A SUP electric pump will not only save you time, but it is also very efficient and will not cause you to break a sweat. In short, using an electric pump to inflate your SUP board will be a pleasure.

Before we say goodbye, don’t forget to check our our best-in-the-market electric SUP pumps , they are reliable and reasonably priced.

If you are looking for the best overall electric SUP pump, I suggest you look at the Outdoor Master Shark II.

That’s all for this article, see you all.